Home >> Remote Sensors
a2b-LOG 1X Series Pulse Sensors |
| a2b-LOG 100 - GPRS Meter Transceiver |
|
- Automatic Pulse Reading and Monitoring
- Advanced Meter communication Interface Unit
- Multiple input channels for Remote Pulse Reading
- Compatible with most meters with Pulse or Volt-Free Relay output
- GPRS enabled using a2b Communication proven protocol
- Advanced Dual RISC processor system
- Tri-band 900/1800/1900 MHz (operates worldwide)
- Real-time clock for date and time stamp
- Password protected for authorised user access only
- Unlimited Transmission Range
- Built-in user friendly management software
- Automatic Network Reconnection
- Ready to operate - No extra software
|
|
|
|
|
| a2b-LOG 10TX-1/2 - Wireless Pulse Transmitter |
|
- Single or dual pulse input Pulse transmitters
- Secure WBFM UHF secure transmission protocol
- Unique Hardware Address with each unit having a fixed address
- Integrated ESP Protocol with anti-data collision protection
- VHF 173 - 219MHz (includes operation on the UK AMR band to MPT1601)
- VHF Transmission range is typically 500m and 1Km (in building 100m - 500m)
- UHF 434MHz, 869-915MHz
- UHF Transmission range is typically 250m (in building 30 - 75m)
- Easy-to-Install DIN Rail Enclosure with zero maintenance
- Battery Operated with 10+ years battery life
- Evaluation Pack Available
|
|
|
|
|
| a2b-LOG 10RX - Wireless Pulse Receiver |
|
- Direct Interface to your chosen hardware/device/host PC
- Receive multiple Pulse Reading from Transmitters within proximity of transmission
- Integrated ESP Protocol with anti-data collision protection
- VHF 173 - 219MHz (includes operation on the UK AMR band to MPT1601)
- VHF Transmission range is typically 500m and 1Km (in building 100m - 500m)
- UHF 434MHz, 869-915MHz
- UHF Transmission range is typically 250m (in building 30 - 75m)
- Secure WBFM UHF secure transmission protocol
- Data rates: 9600
- RS232 Interface (RS422 and RS485 available on request)
- Wide Voltage Operation 6-24Vdc
- Repeaters available for extended range of transmission
- Compatible to my a2b-LOG PULSE software
- Works with Hyperterminal or any serial emulator software
- Evaluation Pack Available
|
|
|
|
|
| a2b-LOG 11TX-1/2/3/4 - GSM Pulse Transmitter |
|
- Fully self-contained GSM Pulse Transmitter
- Direct Interface to your chosen hardware with pulse output or Volt-Free Relay Outputs
- Advanced Dual RISC processor on-board
- Multiple input channels for Remote Pulse Reading
- Integrated ESP Protocol with anti-data collision protection
- Operates on 900MHz, 1800MHz and 1900MHz
- Secure Encoded transmission protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Pulse software
- Ready to operate - No extra software
|
|
|
|
|
| a2b-LOG 11RX - GSM Pulse Receiver |
|
- Fully self-contained GSM Pulse Receiver
- Direct Interface to your chosen hardware/device/host PC
- Advanced Automatic-Answering Capability
- Advanced Automatic-Disconnect, when no incoming data is present in the GSM or serial interface
- Pulse Relay Output channels reproducing pulse count
- Pulse Count Output via Serial connection (RS232)
- Advanced Dual RISC processor on-board
- Integrated ESP Protocol with anti-data collision protection
- Operates on 900MHz, 1800MHz and 1900MHz
- Secure Encoded communication protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Pulse software
- Ready to operate - No extra software
|
|
|
|
|
| a2b-LOG 12TX-1/2/3/4 - GPRS Pulse Transmitter |
|
- Fully self-contained GPRS PULSE Transmitter
- Always connected technology providing real-time reading
- Multiple channels for Remote Pulse Reading
- Global Coverage operating on 900MHz, 1800MHz and 1900MHz bands
- Integrated ESP Protocol with anti-data collision protection
- Automatic Health Reporting for field unit status
- All measurements are timestamp and datestamp
- Guarantee data delivery protocol
- Advanced Dual RISC processor on-board
- Secure Encoded transmission protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Pulse software
- Ready to operate - No extra software
|
|
|
|
|
| a2b-LOG 12RX - GPRS Pulse Receiver |
|
- Fully self-contained GPRS Pulse Receiver
- Direct Interface to your chosen hardware/device/host PC
- Always connected technology providing real-time reading
- Multiple channels for Remote Pulse Reading
- Global Coverage operating on 900MHz, 1800MHz and 1900MHz bands
- Integrated ESP Protocol with anti-data collision protection
- Pulse Relay Output channels reproducing pulse count
- Pulse Count Output via Serial connection (RS232)
- Advanced Dual RISC processor on-board
- Integrated ESP Protocol with anti-data collision protection
- Operates on 900MHz, 1800MHz and 1900MHz
- Secure Encoded communication protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Pulse software
- Ready to operate - No extra software
|
|
|
|
|
| a2b-LOG 13TX-1/2/3/4 - Ethernet Pulse Transmitter |
|
- Multi-channel Pulse transmitter
- Counts pulses from any source and automatically transmit reading via the ethernet
- Plug and Measure Technology
- Unique Hardware Address with each unit having a fixed address
- Rapid Pulse monitoring with instant Ethernet Connection
- Manual static IP address allocation or can receive one by a DHCP request
- Integrated ESP Protocol with anti-data collision protection
- Compatible to my a2b-LOG Pulse Ethernet software
- Pulse Reading can be received using Hyperterminal via a Ethernet Receiver
- asy-to-Install DIN Rail Enclosure with zero maintenance
- Ready to operate
- Evaluation Pack Available
|
|
|
|
|
| a2b-LOG 13RX - Ethernet Pulse Receiver |
|
- Fully self-contained Ethernet Pulse Receiver
- Direct Interface to your chosen hardware/device/host PC
- Manual static IP address allocation or can receive one by a DHCP request
- Pulse Relay Output channels reproducing pulse count
- Pulse Count Output via Serial connection (RS232) - RS422, RS485 and RJ45 available upon request
- Advanced Dual RISC processor on-board
- Integrated ESP Protocol with anti-data collision protection
- Rapid Pulse monitoring with instant Ethernet Connection
- Secure Encoded communication protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Pulse Ethernet software
- Ready to operate - No extra software
|
|
|
|
|
a2b-LOG 2X Series Temperature Sensors |
| a2b-LOG 20TX-1/2 - Wireless Temperature Transmitter |
|
- Single or dual pulse input Temperature transmitters
- Pre-calibrated digital temperature transmitter with 1m fly-lead (longer cable optional)
- Unit measures temperature over a span from -55 to +100°C.
- 9-bit thermometer resolution (Accuracy typically +/- 0.5°C (-10 to +85°C)
- Secure WBFM UHF transmission protocol
- Unique Hardware Address with each unit having a fixed address
- Integrated ESP Protocol with anti-data collision protection
- VHF 173 - 219MHz (includes operation on the UK AMR band to MPT1601)
- VHF Transmission range is typically 500m and 1Km (in building 100m - 500m)
- UHF 434MHz, 869-915MHz
- UHF Transmission range is typically 250m (in building 30 - 75m)
- Easy-to-Install DIN Rail Enclosure with zero maintenance
- Battery Operated with 10+ years battery life
- Evaluation Pack Available
|
|
|
|
|
| a2b-LOG 20RX - Wireless Temperature Receiver |
|
- Direct Interface to your chosen hardware/device/host PC
- Receive multiple Temperature Reading from Transmitters within proximity of transmission
- Integrated ESP Protocol with anti-data collision protection
- UHF 434MHz, 869-915MHz
- UHF Transmission range is typically 250m (in building 30 - 75m)
- Secure WBFM UHF secure transmission protocol
- Data rates: 9600
- RS232 Interface (RS422 and RS485 available on request)
- Wide Voltage Operation 6-24Vdc
- Repeaters available for extended range of transmission
- Compatible to my a2b-LOG Temperature software
- Works with Hyperterminal or any serial emulator software
|
|
|
|
|
| a2b-LOG 21TX-1/2/3/4 - GSM Temperature Transmitter |
|
- Fully self-contained GSM Temperature Transmitter
- Temperature Sensor comes with 1 meter cable for easy access to area of measurement
- Advanced Dual RISC processor on-board
- Multiple channels for Remote Temperature Reading
- Integrated ESP Protocol with anti-data collision protection
- Operates on 900MHz, 1800MHz and 1900MHz
- Secure Encoded transmission protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Temperature software
- Ready to operate - No extra software
|
|
|
|
|
| a2b-LOG 21RX - GSM Temperature Receiver |
|
- Fully self-contained GSM Temperature Receiver
- Direct Interface to your chosen hardware/device/host PC
- Advanced Automatic-Answering Capability
- Advanced Automatic-Disconnect, when no incoming data is present in the GSM or serial interface
- Temperature Output via Serial connection (RS232)
- Advanced Dual RISC processor on-board
- Integrated ESP Protocol with anti-data collision protection
- Operates on 900MHz, 1800MHz and 1900MHz
- Secure Encoded communication protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Temperature software
- Ready to operate - No extra software
|
|
|
|
|
| a2b-LOG 22TX-1/2/3/4 - GPRS Temperature Transmitter |
|
- Fully self-contained GPRS Temperature Transmitter
- Always connected technology providing real-time reading
- Multiple channels for Remote Temperature Reading
- Global Coverage operating on 900MHz, 1800MHz and 1900MHz bands
- Integrated ESP Protocol with anti-data collision protection
- Automatic Health Reporting for field unit status
- All measurements are timestamp and datestamp
- Guarantee data delivery protocol
- Advanced Dual RISC processor on-board
- Secure Encoded transmission protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Temperature software
- Ready to operate - No extra software
|
|
|
|
|
| a2b-LOG 22RX - GPRS Temperature Receiver |
|
- Fully self-contained GPRS Temperature Receiver
- Direct Interface to your chosen hardware/device/host PC
- Always connected technology providing real-time reading
- Multiple channels for Remote Temperature Reading
- Global Coverage operating on 900MHz, 1800MHz and 1900MHz bands
- Integrated ESP Protocol with anti-data collision protection
- Temperature Output via Serial connection (RS232)
- Advanced Dual RISC processor on-board
- Integrated ESP Protocol with anti-data collision protection
- Operates on 900MHz, 1800MHz and 1900MHz
- Secure Encoded communication protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Temperature software
- Ready to operate - No extra software
|
|
|
|
|
| a2b-LOG 23TX-1/2/3/4 - Ethernet Temperature Transmitter |
|
- Multi-channel Ethernet Temperature transmitter
- Measures temperature from any source and automatically transmit reading via the Ethernet
- Plug and Measure Technology
- Pre-calibrated digital temperature transmitter with 1m fly-lead (longer cable optional)
- Unit measures temperature over a span from -55 to +100°C.
- 9-bit thermometer resolution (Accuracy typically +/- 0.5°C (-10 to +85°C)
- Unique Hardware Address with each unit having a fixed address
- Integrated ESP Protocol with anti-data collision protection
- Rapid temperature monitoring with instant Ethernet Connection
- Manual static IP address allocation or can receive one by a DHCP request
- Easy-to-Install DIN Rail Enclosure with zero maintenance
- Compatible to my a2b-LOG Temperature Ethernet software
- Temperature Reading can be received using Hyperterminal via a Ethernet Receiver
- Evaluation Pack Available
|
|
|
|
|
| a2b-LOG 23RX - Ethernet Temperature Receiver |
|
- Fully self-contained Ethernet Temperature Receiver
- Direct Interface to your chosen hardware/device/host PC
- Manual static IP address allocation or can receive one by a DHCP request
- Temperature Value Output via Serial connection (RS232) - RS422, RS485 and RJ45 available upon request
- Advanced Dual RISC processor on-board
- Integrated ESP Protocol with anti-data collision protection
- Rapid Temperature monitoring with instant Ethernet Connection
- Secure Encoded communication protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Temperature Ethernet software
- Ready to operate - No extra software
|
|
|
|
|
a2b-LOG3X Series Temperature & Humidity Sensors |
| a2b-LOG 30TX-1/2 - Wireless Temperature & Humidity Transmitter |
|
- Single Temperature & Humidity transmitters
- Pre-calibrated digital temperature transmitter with 1m fly-lead (longer cable optional)
- Unit measures temperature over a span from -55 to +100°C.
- 9-bit thermometer resolution (Accuracy typically +/- 0.5°C (-10 to +85°C)
- Humidity range: 10% to 90% RH
- Secure WBFM UHF secure transmission protocol
- Unique Hardware Address with each unit having a fixed address
- Integrated ESP Protocol with anti-data collision protection
- VHF 173 - 219MHz (includes operation on the UK AMR band to MPT1601)
- VHF Transmission range is typically 500m and 1Km (in building 100m - 500m)
- UHF 434MHz, 869-915MHz typical range of 250m (in building 30 - 75m)
- Easy-to-Install DIN Rail Enclosure with zero maintenance
- Battery Operated with 10+ years battery life
- Evaluation Pack Available
|
|
|
|
|
| a2b-LOG 30RX - Wireless Temperature & Humidity Receiver |
|
- Direct Interface to your chosen hardware/device/host PC
- Receive multiple Temperature & Humidity Reading from Transmitters within proximity of transmission
- Integrated ESP Protocol with anti-data collision protection
- UHF 434MHz, 869-915MHz
- UHF Transmission range is typically 250m (in building 30 - 75m)
- Secure WBFM UHF secure transmission protocol
- Data rates: 9600
- RS232 Interface (RS422 and RS485 available on request)
- Wide Voltage Operation 6-24Vdc
- Repeaters available for extended range of transmission
- Compatible to my a2b-LOG Temperature & Humidity software
- Works with Hyperterminal or any serial emulator software
|
|
|
|
|
| a2b-LOG 31TX-1/2/3/4 - GSM Temperature & Humidity Transmitter |
|
- Fully self-contained GSM Temperature & Humidity Transmitter
- Advanced Dual RISC processor on-board
- Multiple channels for Remote Temperature & Humidity Reading
- Integrated ESP Protocol with anti-data collision protection
- Operates on 900MHz, 1800MHz and 1900MHz
- Secure Encoded transmission protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Temperature & Humidity software
- Ready to operate - No extra software
|
|
|
|
|
| a2b-LOG 31RX - GSM Temperature & Humidity Receiver |
|
- Fully self-contained GSM Temperature & Humidity Receiver
- Direct Interface to your chosen hardware/device/host PC
- Advanced Automatic-Answering Capability
- Advanced Automatic-Disconnect, when no incoming data is present in the GSM or serial interface
- Temperature & Humidity Output via Serial connection (RS232)
- Advanced Dual RISC processor on-board
- Integrated ESP Protocol with anti-data collision protection
- Operates on 900MHz, 1800MHz and 1900MHz
- Secure Encoded communication protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Temperature & Humidity software
- Ready to operate - No extra software
|
|
|
|
|
| a2b-LOG 32TX-1/2/3/4 - GPRS Temperature & Humidity Transmitter |
|
- Fully self-contained GPRS Temperature & Humidity Transmitter
- Always connected technology providing real-time reading
- Multiple channels for Remote Temperature & Humidity Reading
- Global Coverage operating on 900MHz, 1800MHz and 1900MHz bands
- Integrated ESP Protocol with anti-data collision protection
- Automatic Health Reporting for field unit status
- All measurements are timestamp and datestamp
- Guarantee data delivery protocol
- Advanced Dual RISC processor on-board
- Secure Encoded transmission protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Temperature & Humidity software
- Ready to operate - No extra software
|
|
|
|
|
| a2b-LOG 32RX - GPRS Temperature & Humidity Receiver |
|
- Fully self-contained GPRS Temperature & Humidity Receiver
- Direct Interface to your chosen hardware/device/host PC
- Always connected technology providing real-time reading
- Multiple channels for Remote Temperature & Humidity Reading
- Global Coverage operating on 900MHz, 1800MHz and 1900MHz bands
- Integrated ESP Protocol with anti-data collision protection
- Temperature & Humidity Output via Serial connection (RS232)
- Advanced Dual RISC processor on-board
- Integrated ESP Protocol with anti-data collision protection
- Operates on 900MHz, 1800MHz and 1900MHz
- Secure Encoded communication protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Temperature & Humidity software
- Ready to operate - No extra software
|
|
|
|
|
| a2b-LOG 33TX-1/2/3/4 - Ethernet Temperature & Humidity Transmitter |
|
- Multi-channel Temperature & Humidity transmitter
- Measured Temperature & Humidity from any source are automatically transmit reading via the Ethernet
- Plug and Measure Technology
- Unique Hardware Address with each unit having a fixed address
- Rapid Temperature & Humidity monitoring with instant Ethernet Connection
- Manual static IP address allocation or can receive one by a DHCP request
- Integrated ESP Protocol with anti-data collision protection
- Compatible to my a2b-LOG Temperature & Humidity Ethernet software
- Temperature & Humidity Reading can be received using Hyperterminal via a Ethernet Receiver
- Easy-to-Install DIN Rail Enclosure with zero maintenance
- Ready to operate
- Evaluation Pack Available
|
|
|
|
|
| a2b-LOG 33RX - Ethernet Temperature & Humidity Receiver |
|
- Fully self-contained Ethernet Temperature & Humidity Receiver
- Direct Interface to your chosen hardware/device/host PC
- Manual static IP address allocation or can receive one by a DHCP request
- Temperature & Humidity Value Output via Serial connection (RS232) - RS422, RS485 and RJ45 available upon request
- Advanced Dual RISC processor on-board
- Integrated ESP Protocol with anti-data collision protection
- Rapid Temperature & Humidity monitoring with instant Ethernet Connection
- Secure Encoded communication protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Temperature & Humidity Ethernet software
- Ready to operate - No extra software
|
|
|
|
|
a2b-LOG 4X Series Alarm Sensors |
| a2b-LOG 40TX-1/2 - Wireless Alarm Transmitter |
|
- Single Alarm input Alarm transmitters
- Secure WBFM UHF secure transmission protocol
- Unique Hardware Address with each unit having a fixed address
- Integrated ESP Protocol with anti-data collision protection
- VHF 173 - 219MHz (includes operation on the UK AMR band to MPT1601)
- VHF Transmission range is typically 500m and 1Km (in building 100m - 500m)
- UHF 434MHz, 869-915MHz
- UHF Transmission range is typically 250m (in building 30 - 75m)
- Easy-to-Install DIN Rail Enclosure with zero maintenance
- Battery Operated with 10+ years battery life
- Evaluation Pack Available
|
|
|
|
|
| a2b-LOG 40RX - Wireless Alarm Receiver |
|
- Direct Interface to your chosen hardware/device/host PC
- Receive multiple Alarm Reading from Transmitters within proximity of transmission
- Integrated ESP Protocol with anti-data collision protection
- UHF 434MHz, 869-915MHz
- UHF Transmission range is typically 250m (in building 30 - 75m)
- Secure WBFM UHF secure transmission protocol
- Data rates: 9600
- RS232 Interface (RS422 and RS485 available on request)
- Wide Voltage Operation 6-24Vdc
- Repeaters available for extended range of transmission
- Compatible to my a2b-LOG Alarm software
- Works with Hyperterminal or any serial emulator software
|
|
|
|
|
| a2b-LOG 41TX-1/2/3/4 - GSM Alarm Transmitter |
|
- Fully self-contained GSM Alarm Transmitter
- Alarm Sensor comes with 1 meter cable for easy access to area of measurement
- Advanced Dual RISC processor on-board
- Multiple channels for Remote Alarm Reading
- Integrated ESP Protocol with anti-data collision protection
- Operates on 900MHz, 1800MHz and 1900MHz
- Secure Encoded transmission protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Alarm software
- Ready to operate - No extra software
|
|
|
|
|
| a2b-LOG 41RX - GSM Alarm Receiver |
|
- Fully self-contained GSM Alarm Receiver
- Direct Interface to your chosen hardware/device/host PC
- Advanced Automatic-Answering Capability
- Advanced Automatic-Disconnect, when no incoming data is present in the GSM or serial interface
- Alarm Output via Serial connection (RS232)
- Advanced Dual RISC processor on-board
- Integrated ESP Protocol with anti-data collision protection
- Operates on 900MHz, 1800MHz and 1900MHz
- Secure Encoded communication protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Alarm software
- Ready to operate - No extra software
|
|
|
|
|
| a2b-LOG 42TX-1/2/3/4 - GPRS Alarm Transmitter |
|
- Fully self-contained GPRS Alarm Transmitter
- Always connected technology providing real-time reading
- Multiple channels for Remote Alarm Reading
- Global Coverage operating on 900MHz, 1800MHz and 1900MHz bands
- Integrated ESP Protocol with anti-data collision protection
- Automatic Health Reporting for field unit status
- All measurements are timestamp and datestamp
- Guarantee data delivery protocol
- Advanced Dual RISC processor on-board
- Secure Encoded transmission protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Alarm software
- Ready to operate - No extra software
|
|
|
|
|
| a2b-LOG 42RX - GPRS Alarm Receiver |
|
- Fully self-contained GPRS Alarm Receiver
- Direct Interface to your chosen hardware/device/host PC
- Always connected technology providing real-time reading
- Multiple channels for Remote Alarm Reading
- Global Coverage operating on 900MHz, 1800MHz and 1900MHz bands
- Integrated ESP Protocol with anti-data collision protection
- Alarm Output via Serial connection (RS232)
- Advanced Dual RISC processor on-board
- Integrated ESP Protocol with anti-data collision protection
- Operates on 900MHz, 1800MHz and 1900MHz
- Secure Encoded communication protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Alarm software
- Ready to operate - No extra software
|
|
|
|
|
| a2b-LOG 43TX-1/2/3/4 - Ethernet Alarm Transmitter |
|
- Multi-channel Alarm transmitter
- Monitors Alarm status from any source then automatically transmit alarm via the Ethernet
- Plug and Detect Technology
- Unique Hardware Address with each unit having a fixed address
- Rapid Alarm monitoring with instant Ethernet Connection
- Manual static IP address allocation or can receive one by a DHCP request
- Integrated ESP Protocol with anti-data collision protection
- Compatible to my a2b-LOG Alarm Ethernet software
- Alarm Reading can be received using Hyperterminal via a Ethernet Receiver
- Easy-to-Install DIN Rail Enclosure with zero maintenance
- Ready to operate
- Evaluation Pack Available
|
|
|
|
|
| a2b-LOG 43RX - Ethernet Alarm Receiver |
|
- Fully self-contained Ethernet Alarm Receiver
- Direct Interface to your chosen hardware/device/host PC
- Manual static IP address allocation or can receive one by a DHCP request
- Alarm Status Output via Serial connection (RS232) - RS422, RS485 and RJ45 available upon request
- Advanced Dual RISC processor on-board
- Integrated ESP Protocol with anti-data collision protection
- Rapid Alarm monitoring with instant Ethernet Connection
- Secure Encoded communication protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Alarm Ethernet software
- Ready to operate - No extra software
|
|
|
|
|
a2b-LOG 5X Series Current Sensors |
| a2b-LOG 50TX-1/2 - Wireless Current Transmitter |
|
- Single or Dual input Current transmitters
- Secure WBFM UHF secure transmission protocol
- Unique Hardware Address with each unit having a fixed address
- Integrated ESP Protocol with anti-data collision protection
- UHF 434MHz, 869-915MHz
- UHF Transmission range is typically 250m (in building 30 - 75m)
- Easy-to-Install DIN Rail Enclosure with zero maintenance
- Repeaters available for extended range of transmission
- Compatible to my a2b-LOG Current software
- Ready to operate - No extra software
- Evaluation Pack Available
|
|
|
|
|
| a2b-LOG 50RX - Wireless Current Receiver |
|
- Direct Interface to your chosen hardware/device/host PC
- Receive multiple Current Reading from Transmitters within proximity of transmission
- Integrated ESP Protocol with anti-data collision protection
- UHF 434MHz, 869-915MHz
- UHF Transmission range is typically 250m (in building 30 - 75m)
- Secure WBFM UHF secure transmission protocol
- Data rates: 9600
- RS232 Interface (RS422 and RS485 available on request)
- Wide Voltage Operation 6-24Vdc
- Repeaters available for extended range of transmission
- Compatible to my a2b-LOG Current software
- Works with Hyperterminal or any serial emulator software
|
|
|
|
|
| a2b-LOG 51TX-1/2/3/4 - GSM Current Transmitter |
|
- Fully self-contained GSM Current Transmitter
- Current Sensor comes with 1 meter cable for easy access to area of measurement
- Advanced Dual RISC processor on-board
- Multiple channels for Remote Current Reading
- Integrated ESP Protocol with anti-data collision protection
- Operates on 900MHz, 1800MHz and 1900MHz
- Secure Encoded transmission protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Current software
- Ready to operate - No extra software
|
|
|
|
|
| a2b-LOG 51RX - GSM Current Receiver |
|
- Fully self-contained GSM Current Receiver
- Direct Interface to your chosen hardware/device/host PC
- Advanced Automatic-Answering Capability
- Advanced Automatic-Disconnect, when no incoming data is present in the GSM or serial interface
- Alarm Output via Serial connection (RS232)
- Advanced Dual RISC processor on-board
- Integrated ESP Protocol with anti-data collision protection
- Operates on 900MHz, 1800MHz and 1900MHz
- Secure Encoded communication protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Current software
- Ready to operate - No extra software
|
|
|
|
|
| a2b-LOG 52TX-1/2/3/4 - GPRS CurrentTransmitter |
|
- Fully self-contained GPRS Current Transmitter
- Always connected technology providing real-time reading
- Multiple channels for Remote Current Reading
- Global Coverage operating on 900MHz, 1800MHz and 1900MHz bands
- Integrated ESP Protocol with anti-data collision protection
- Automatic Health Reporting for field unit status
- All measurements are timestamp and datestamp
- Guarantee data delivery protocol
- Advanced Dual RISC processor on-board
- Secure Encoded transmission protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Current software
- Ready to operate - No extra software
|
|
|
|
|
| a2b-LOG 52RX - GPRS Current Receiver |
|
- Fully self-contained GPRS Current Receiver
- Direct Interface to your chosen hardware/device/host PC
- Always connected technology providing real-time reading
- Multiple channels for Remote Current Reading
- Global Coverage operating on 900MHz, 1800MHz and 1900MHz bands
- Integrated ESP Protocol with anti-data collision protection
- Current Output via Serial connection (RS232)
- Advanced Dual RISC processor on-board
- Integrated ESP Protocol with anti-data collision protection
- Operates on 900MHz, 1800MHz and 1900MHz
- Secure Encoded communication protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Current software
- Ready to operate - No extra software
|
|
|
|
|
| a2b-LOG 53TX-1/2/3/4 - Ethernet Current Transmitter |
|
- Multi-channel Current transmitter
- Measures Current level from any source then automatically transmit alarm via the Ethernet
- Plug and Detect Technology
- Unique Hardware Address with each unit having a fixed address
- Rapid Current monitoring with instant Ethernet Connection
- Manual static IP address allocation or can receive one by a DHCP request
- Integrated ESP Protocol with anti-data collision protection
- Compatible to my a2b-LOG Current Ethernet software
- Current Reading can be received using Hyperterminal via a Ethernet Receiver
- Easy-to-Install DIN Rail Enclosure with zero maintenance
- Ready to operate
- Evaluation Pack Available
|
|
|
|
|
| a2b-LOG 53RX - Ethernet Current Receiver
|
|
- Fully self-contained Ethernet Current Receiver
- Direct Interface to your chosen hardware/device/host PC
- Manual static IP address allocation or can receive one by a DHCP request
- Current Value Output via Serial connection (RS232) - RS422, RS485 and RJ45 available upon request
- Advanced Dual RISC processor on-board
- Integrated ESP Protocol with anti-data collision protection
- Rapid Current monitoring with instant Ethernet Connection
- Secure Encoded communication protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Current Ethernet software
- Ready to operate - No extra software
|
|
|
|
|
a2b-LOG 6X Series Voltage Sensors |
| a2b-LOG 60TX-1/2 - Wireless Voltage Transmitter |
|
- Single or Dual input Voltage transmitters
- Secure WBFM UHF secure transmission protocol
- Unique Hardware Address with each unit having a fixed address
- Integrated ESP Protocol with anti-data collision protection
- UHF 434MHz, 869-915MHz
- UHF Transmission range is typically 250m (in building 30 - 75m)
- Easy-to-Install DIN Rail Enclosure with zero maintenance
- Repeaters available for extended range of transmission
- Compatible to my a2b-LOG Voltage software
- Ready to operate - No extra software
- Evaluation Pack Available
|
|
|
|
|
| a2b-LOG 60RX - Wireless Voltage Receiver |
|
- Direct Interface to your chosen hardware/device/host PC
- Receive multiple Voltage Reading from Transmitters within proximity of transmission
- Integrated ESP Protocol with anti-data collision protection
- UHF 434MHz, 869-915MHz
- UHF Transmission range is typically 250m (in building 30 - 75m)
- Secure WBFM UHF secure transmission protocol
- Data rates: 9600
- RS232 Interface (RS422 and RS485 available on request)
- Wide Voltage Operation 6-24Vdc
- Repeaters available for extended range of transmission
- Compatible to my a2b-LOG Voltage software
- Works with Hyperterminal or any serial emulator software
|
|
|
|
|
| a2b-LOG 61TX-1/2/3/4 - GSM Voltage Transmitter |
|
- Fully self-contained GSM Voltage Transmitter
- Voltage Sensor comes with 1 meter cable for easy access to area of measurement
- Advanced Dual RISC processor on-board
- Multiple channels for Remote Current Reading
- Integrated ESP Protocol with anti-data collision protection
- Operates on 900MHz, 1800MHz and 1900MHz
- Secure Encoded transmission protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Voltage software
- Ready to operate - No extra software
|
|
|
|
|
| a2b-LOG 61RX - GSM Voltage Receiver |
|
- Fully self-contained GSM Voltage Receiver
- Direct Interface to your chosen hardware/device/host PC
- Advanced Automatic-Answering Capability
- Advanced Automatic-Disconnect, when no incoming data is present in the GSM or serial interface
- Alarm Output via Serial connection (RS232)
- Advanced Dual RISC processor on-board
- Integrated ESP Protocol with anti-data collision protection
- Operates on 900MHz, 1800MHz and 1900MHz
- Secure Encoded communication protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Voltage software
- Ready to operate - No extra software
|
|
|
|
|
| a2b-LOG 62TX-1/2/3/4 - GPRS VoltageTransmitter |
|
- Fully self-contained GPRS Voltage Transmitter
- Always connected technology providing real-time reading
- Multiple channels for Remote Voltage Reading
- Global Coverage operating on 900MHz, 1800MHz and 1900MHz bands
- Integrated ESP Protocol with anti-data collision protection
- Automatic Health Reporting for field unit status
- All measurements are timestamp and datestamp
- Guarantee data delivery protocol
- Advanced Dual RISC processor on-board
- Secure Encoded transmission protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Voltage software
- Ready to operate - No extra software
|
|
|
|
|
| a2b-LOG 62RX - GPRS Voltage Receiver |
|
- Fully self-contained GPRS Voltage Receiver
- Direct Interface to your chosen hardware/device/host PC
- Always connected technology providing real-time reading
- Multiple channels for Remote Voltage Reading
- Global Coverage operating on 900MHz, 1800MHz and 1900MHz bands
- Integrated ESP Protocol with anti-data collision protection
- Voltage Output via Serial connection (RS232)
- Advanced Dual RISC processor on-board
- Integrated ESP Protocol with anti-data collision protection
- Operates on 900MHz, 1800MHz and 1900MHz
- Secure Encoded communication protocol
- Built-in user friendly management software
- Wide Voltage Operation 6-24Vdc
- Compatible to my a2b-LOG Voltage software
- Ready to operate - No extra software
|
|
|
|
| |
