effective communication through innovation
  
Remote Metering and Monitoring
Temperature Monitoring
Building and Environmental Monitoring
Counting System
Security and Surveillance
Traceability
Materials Management
Field Service
Cellular Modems Ethernet Modems Radio Modems & Modules Remote Sensors
Remote I/O Dataloggers Remote Controllers & Alerting M2M & Telemetry
Home >> Remote Controllers & Alerting
PSW Series
PSW802.11 - Page Switch Module
PSW802.11 - Page Switch Module
  • Ultra Low Power Consumption (500 uA) on Receive Mode
  • Operates on Secure Network ensuring only authorised user can command the PSW802.11
  • Secure 6-digit pin number (fixed at manufacture)
  • Command code to select momentary, timed (1 sec to 60 minutes) outputs
  • Five individually switched outputs are available, with the option of CMOS logic or open collector outputs. Optionally one output may be replaced with a mechanical 5, 12 or 24V dc relay.
  • Internal loop antenna or external antenna connector (BNC)
  • Evaluation Pack Available
PSW3000 - Remote Switching Controller
PSW3000 - Remote Switching Controller
  • Tri-band 900/1800/1900 MHz
  • Advanced RISC processor on-board
  • Ultra Low Power Consumption (500 uA) on Receive Mode
  • 100% True Transparent Communication Link
  • Advanced Power Management
  • Operates on Secure Network ensuring only authorised user can command the PSW3000
  • Instant Notification Technology enables the user to receive status from the remote system as it happens
  • OEM Available
  • Evaluation Pack Available
PSW4000 - Remote Switching & Monitoring Controller
PSW4000 - Remote Switching & Monitoring Controller
  • Tri-band 900/1800/1900 MHz
  • Advanced RISC processor on-board
  • Ultra Low Power Consumption (500 uA) on Receive Mode
  • Advanced Power Management
  • Remote Switching with power outputs
  • 8 Intelligent Monitoring channels
  • Instant Notification Technology enables the user to receive status from the remote system as it happens
  • OEM Available
  • Evaluation Pack Available
PSW5000 - Wire-Free Mains Switching Controller
PSW5000 - Wire-Free Mains Switching Controller
  • Tri-band 900/1800/1900 MHz
  • Advanced RISC processor on-board
  • Activate up to 3 remote system using any Landline phone, Cell/Mobile phone or PowerSwitch Dedicated Software
  • Secure System Activation/Reset/Momentary ON/OFF with Instant Notifications to up to 3 cell/mobile phones
  • Easy system configuration using PSW5000 PowerSwitch built-in management software
  • Instant Notification Technology enables the user to receive status from the remote system as it happens
PSW-EU - Expansion Unit
PSW-EU - Expansion Unit
  • Available with a single or 5 Output power relay at 7A, 250VAC
  • Relays follow the status of outputs D1 to D5, interfacing the Page Switch to the outside world
  • LEDs provided to indicate relay status and power on/off
  • Relays fully rated at 7A, 250VAC each with change over contacts
  • 1.5mm CSA screw terminal blocks for connections
  • Low power 12V-dc operation available with the option of disabling the power LED
  • PCB measures 105mm x 105mm x 20mm
  • Available in Rugged IP rated enclosure 130mm x 130mm x 70mm
  • OEM Available


RCM Series
RCM30 - 2 Channel Remote Switching Unit
RCM30 - 2 Channel Remote Switching Unit
  • Tri-band 900/1800/1900 MHz (operates worldwide)
  • Advanced RISC processor on-board
  • Advanced Power Management
  • Programmable 2 Output Channel
  • Authenticated access for remote switching
  • Password Protected for configuration access
  • User-Friendly built-in Management Software for easy configuration
  • OEM Available
  • Evaluation Pack Available
RCM40 - 8 Channel Remote Monitoring Unit
RCM40 - 8 Channel Remote Monitoring Unit
  • Tri-band 900/1800/1900 MHz (operates worldwide)
  • Advanced RISC processor on-board
  • Programmable 8-input channels
  • Advanced Power Management
  • RS232 / RS422 / RS485 Interface
  • Intelligent 8 input channel each one can be configured to generate alarm/status via SMS
  • User-Friendly built-in Management Software for easy configuration
  • OEM Available
  • Evaluation Pack Available
RCM50 - Monitoring and Control Communicator
RCM50 - Monitoring and Control Communicator
  • Tri-band 900/1800/1900 MHz (operates worldwide)
  • Advanced RISC processor on-board
  • Advanced Power Management
  • Programmable 8 input channels with instant notification via SMS
  • Programmable 2 output channels with remote control via secure SMS
  • Authenticated access for remote configuration access
  • User-Friendly built-in Management Software for easy configuration
  • OEM Available
  • Evaluation Pack Available
RCM60 - 8 Channel Remote Switching Unit
RCM60 - 8 Channel Remote Switching Unit
  • Tri-band 900/1800/1900 MHz (operates worldwide)
  • Advanced RISC processor on-board
  • Advanced Power Management
  • Programmable 8 output channels with instant notification via SMS
  • Authenticated access for remote switching
  • Password Protected for configuration access
  • OEM Available
  • Evaluation Pack Available
RCM999-AA - Auto-Alert Communicator
RCM999-AA - Auto-Alert Communicator
  • Tri-band 900/1800/1900 MHz (operates worldwide)
  • Advanced RISC processor on-board
  • Programmable 8-input channels
  • 100% True Transparent Communication Link
  • Advanced Power Management
  • RS232 / RS422 / RS485 Interface
  • Intelligent 8 input channel each one can be configured to generate alarm/status via SMS
  • Message(s) and destination mobile/cell phone can be defined for each 8 individual input channels
  • User-Friendly built-in Management Software for easy configuration
  • OEM Available
  • Evaluation Pack Available
RCM999-CC - Command & Control Communicator
RCM999-CC - Command & Control Communicator
  • Tri-band 900/1800/1900 MHz (operates worldwide)
  • Advanced RISC processor on-board
  • Advanced Power Management
  • Programmable 8 output channels with instant notification via SMS
  • Authenticated access for remote switching
  • User-Friendly built-in Management Software for easy configuration
  • OEM Available
  • Evaluation Pack Available

RCM999-FC - Flood Alert Communicator
RCM999-FC - Flood Alert Communicator
  • Tri-band 900/1800/1900 MHz (operates worldwide)
  • Advanced RISC processor on-board
  • Advanced Power Management
  • Intelligent 8 input channels each one can be configured to generate alarm/status via SMS
  • Message(s) and destination mobile/cell phone can be defined for each 8 individual input channels
  • User-Friendly built-in Management Software for easy configuration
  • OEM Available
  • Evaluation Pack Available


Ethernet Series
IEC5000 - 2/4/8 Relay Output
IEC5000 - 2/4/8 Relay Output
  • Advance Dual RISC microprocessors
  • Supports TCP/IP, UDP/IP, HTTP, FTP, Email, PPP
  • Advance Management Software
  • Secure Remote Access using Internet Browser
  • Input: 4.75-5.25 VDC 100 mA @ 22.1 MHz; 78 mA @ 11.06 MHz (4 Level of sleep modes)
  • 8 Digital Input Channel
  • 8 Digital Output Channel
  • 8 Relay Output
  • 3 Analogue Input Channel
  • 512K Flash and 512K SRAM
IEC6000 - GPRS Router
IEC6000 - GPRS Router
  • Industrial grade GPRS router
  • Integrated ESP Protocol for secure communication.
  • RJ45 Ethernet connection
  • No distance limitations! Global systems are possible if GPRS network is available.
  • Easy configuration; Web browser based management console
  • IEC6000 GPRS router provides Internet access to locations without fixed connections and mobile vehicles
  • IEC6000 GPRS router connects Ethernet devices to nearest GPRS network
  • Rapid Installation for LAN to Cell connectivity

Home >> Remote Controllers & Alerting
  Home | Smart Solutions | InfoZone | Instant Quote | Order Now
© 2004 a2b Communication. All rights reserved.  

Remote Controllers & Alerting, Wireless Controllers, Wireless Control, Remote Control, Radio Control, RF Control, SMS Control and Switching, Ethernet Control and Switching, Remoter Activation, LAN Control and Switching, WAN Control and Switching, Remote Switching Controller, GSM Control, GPRS Control, 8 Channel Remote Switching Unit, Command & Control, Industrial Radio Remote Control, Remote Control and Monitoring, I/O Controller, I/O Controller is an Ethernet enabled unit containing 8 digital inputs, 8 digital outputs and RS-232/485 serial interface. All the interfaces are accessible over a network using the M2M protocol on TCP/IP, PLC Industrial Wireless Ethernet 2.4 GHz Radio Modem, Ethernet Remote I/O Controller, LonWorks I/O, Ethernet I/O, Control Solutions, industrial remote control and wireless technology, Industrial Automation, Control and Automate, Wireless RF Remote Control