Home >> M2M & Telemetry
| M2M Pro1000 - Remote Controller |
|
- Advance Quad RISC microprocessors system
- Utilise a2b Communication ESP protocol
- Optional Integrated Antenna or External Antenna
- User-Friendly Management Software for Remote Management and Control
- Scaleable Output Channel from 8 to 128 output channels
- Volt-free Relay based Outputs
- Control any channel via Mobile Phone (SMS Text), Internet Browser, Email and Dial-up connection
- Instant Acknowledgement for status report
- Connects with any host equipments
- Wide Voltage Operation 6-24Vdc
- Dual Power Supply input for Redundancy
- M36 Easy-Install DIN Rail Enclosure
|
|
|
|
|
| M2M Pro2000 - Remote Sensor |
|
- Advance Quad RISC microprocessors system
- Utilise a2b Communication ESP protocol
- Optional Integrated Antenna or External Antenna
- User-Friendly Management Software for Remote Management and Monitoring
- Scaleable Monitoring Channel 2/4/6/8 Channels
- Sense/Monitor: Temperature, RH, pH, Pulse, Current and Voltage
- User programmable Threshold value for instant notification/alarm
- Sensor reading can be transmitted in real-time, or logged and transmitted at pre-define period.
- Sensor reading are stored with timestamp and transmitter via Mobile Phone (SMS Text), Internet Browser, Email and Dial-up connection
- Instant Acknowledgement for status report
- Connects with any host equipments
- Wide Voltage Operation 6-24Vdc
- Dual Power Supply input for Redundancy
- M36 Easy-Install DIN Rail Enclosure
|
|
|
|
|
| M2M Pro3000 - Communicator |
|
- Advance Dual RISC microprocessors system
- Tri-band 900/1800/1900 MHz (operates worldwide)
- Advanced Power Management
- Utilise a2b Communication ESP protocol
- Optional Integrated Antenna or External Antenna
- User-Friendly Management Software
- Connects with any host equipments with serial interface (TTL, RS232, RS422 & RS485)
- Advanced Automatic-Answering Capability
- Advanced Automatic-Disconnect, when no incoming data is present in the GSM or serial interface
- 100% True Transparent Communication Link to provide Virtual Link over a wide-area operation
- Authorised Connection via built-in Authentication Process
- Password Protection
- SIM card protection
- Wide Voltage Operation 6-24Vdc
- Dual Power Supply input for Redundancy
- M36 Easy-Install DIN Rail Enclosure
|
|
|
|
|
| M2M Pro4000 - Datalogger |
|
- Advance Dual RISC microprocessors system
- Logs: Temperature, RH, pH, Pulse, Current and Voltage
- Sensor reading are stored with timestamp and transmitter via Mobile Phone (SMS Text), Internet Browser, Email and Dial-up connection
- Utilise a2b Communication ESP protocol
- User-Friendly Management Software
- Optional Integrated Antenna or External Antenna
- Built-in Real-Time Clock (RTC), for Date and Time Stamping
- Low Power Notification
- Password Protected
- User-Addressable System
- Wide Voltage Operation 6-24Vdc
- Dual Power Supply input for Redundancy
- M36 Easy-Install DIN Rail Enclosure
|
|
|
|
|
| @ctiveLink100 - Industrial GPS Communicator |
|
- 12 parallel channel GPS receiver continuously tracks & uses up to 12 satellites to compute & update your position
- Wide Area Augmentation System (WASS) Technology for improve accuracy
- Integrated Radio Transceiver with maximum transmission range of 350 meters (434MHz, 869MHz or 915 MHz)
- Advanced RISC processor on-board with power management system
- Built-in Management Software
- Data Logging Capability of NMEA Data string with 4 Digital Inputs and 4 Digital Outputs
|
|
|
|
|
| @ctiveLink200 - Industrial GPS Communicator |
|
- 12 parallel channel GPS receiver continuously tracks & uses up to 12 satellites to compute & update your position
- Wide Area Augmentation System (WASS) Technology for improve accuracy
- Integrated Radio Transceiver with maximum transmission range of 5 Kilometers (Worldwide Frequency Range)
- Advanced RISC processor on-board with power management system
- Built-in Management Software
- Data Logging Capability of NMEA Data string with 4 Digital Inputs and 4 Digital Outputs
|
|
|
|
|
| @ctiveLink300 - Industrial GPS Communicator |
|
- 12 parallel channel GPS receiver continuously tracks & uses up to 12 satellites to compute & update your position
- Wide Area Augmentation System (WASS) Technology for improve accuracy
- Integrated Radio Transceiver with maximum transmission range of 30Km (Approved for worldwide operation)
- Advanced RISC processor on-board with power management system
- Built-in Management Software
- Data Logging Capability of NMEA Data string with 4 Digital Inputs and 4 Digital Outputs
|
|
|
|
|
| @ctiveLink400 - Industrial GPS Communicator |
|
- 12 parallel channel GPS receiver continuously tracks & uses up to 12 satellites to compute & update your position
- Wide Area Augmentation System (WASS) Technology for improve accuracy
- Tri-Band GSM Transceiver 900/1800/1900 MHz (Approved for worldwide operation)
- Advanced RISC processor on-board with power management system
- Built-in Management Software
- Data Logging Capability of NMEA Data string with 4 Digital Inputs and 4 Digital Outputs
|
|
|
|
|
| @ctiveLink500 - Industrial GPS Communicator |
|
- 12 parallel channel GPS receiver continuously tracks & uses up to 12 satellites to compute & update your position
- Wide Area Augmentation System (WASS) Technology for improve accuracy
- Tri-Band GPRS Transceiver 900/1800/1900 MHz (Approved for worldwide operation)
- Advanced RISC processor on-board with power management system
- Built-in Management Software
- Data Logging Capability of NMEA Data string with 4 Digital Inputs and 4 Digital Outputs
|
|
|
|
|
| iRTU 5 Transmitter - 4-Channel Analog/Digital Input Transmitter (256Kb memory, 350 m range) |
|
- Eliminates wiring
- Four universal input points
- 434/869MHz Pan-European, 915MHz North America
- RS232, Data Interface
- 350m Line-of-Sight Transmission range
- No external antenna required
- User-define addressable system
- Wide Voltage Operation 6-24Vdc
- Dual Power Supply input for Redundancy
- Ruggedised IP65+ enclosure
|
|
|
|
|
| iRTU 5 Receiver - 4-Channel Analog/Digital Input Receiver (256Kb memory, 350 m range) |
|
- Eliminates wiring
- Four universal output points
- 434/869MHz Pan-European, 915MHz North America
- RS232, Data Interface
- No external antenna required
- User-define addressable system
- Wide Voltage Operation 6-24Vdc
- Dual Power Supply input for Redundancy
- Ruggedised IP65+ enclosure
|
|
|
|
|
| iRTU 50 Transmitter - 4-Channel Analog/Digital Input Transmitter (256Kb memory, 5 Km range) |
|
- Eliminates wiring
- Four universal input points
- Licence Exempt in the UK to MPT1329 & Europe and Scandinavia to ETS/EN-300-220-1
- Licence Exempt in Australia to AS 4268.2 1995
- Frequency Options: 434MHz,458MHz, 464-466MHz and 427MHz
- Fully EMC Type Examined to ETS-300-683, Passed at Class 1 level. Approved for licensed operation in the USA to FCC-Part-90
- RS232, Data Interface
- 5Km Line-of-Sight Transmission range
- No external antenna required
- User-define addressable system
- Wide Voltage Operation 6-24Vdc
- Dual Power Supply input for Redundancy
- Ruggedised IP65+ enclosure
|
|
|
|
|
| iRTU 50 Receiver - 4-Channel Analog/Digital Input Receiver (256Kb memory, 5 Km range) |
|
- Eliminates wiring
- Four universal output points
- Licence Exempt in the UK to MPT1329 & Europe and Scandinavia to ETS/EN-300-220-1
- Licence Exempt in Australia to AS 4268.2 1995
- Frequency Options: 434MHz,458MHz, 464-466MHz and 427MHz
- Fully EMC Type Examined to ETS-300-683, Passed at Class 1 level. Approved for licensed operation in the USA to FCC-Part-90
- RS232, Data Interface
- No external antenna required
- User-define addressable system
- Wide Voltage Operation 6-24Vdc
- Dual Power Supply input for Redundancy
- Ruggedised IP65+ enclosure
|
|
|
|
|
| iRTU 500 Transmitter - 4-Channel Analog/Digital Input Transmitter (1Mb memory, global range) |
|
- Eliminates wiring
- Four universal input points
- Tri-Band GSM Communication Engine
- RS232, Data Interface
- Global Operation - Unlimited Transmission Range
- No external antenna required
- User-define addressable system
- Wide Voltage Operation 6-24Vdc
- Dual Power Supply input for Redundancy
- Ruggedised IP65+ enclosure
|
|
|
|
|
| iRTU 500 Receiver - 4-Channel Analog/Digital Input Receiver (1Mb memory, global range) |
|
- Eliminates wiring
- Four universal output points
- Tri-Band GSM Communication Engine
- RS232, Data Interface
- Global Operation - Unlimited Transmission Range
- No external antenna required
- User-define addressable system
- Wide Voltage Operation 6-24Vdc
- Dual Power Supply input for Redundancy
- Ruggedised IP65+ enclosure
|
|
|
|
|
| iRTU 5000 Transmitter - 4-Channel Analog/Digital Input Transmitter (256Kb memory, 5Km range) |
|
- Eliminates wiring
- Four universal input points
- Tri-Band GPRS Communication Engine
- Always Connected Technology
- RS232, Data Interface
- Global Operation - Unlimited Transmission Range
- No external antenna required
- User-define addressable system
- Wide Voltage Operation 6-24Vdc
- Dual Power Supply input for Redundancy
- Ruggedised IP65+ enclosure
|
|
|
|
|
| iRTU 5000 Receiver - 4-Channel Analog/Digital Input Receiver (256Kb memory, 5Km range) |
|
- Eliminates wiring
- Four universal output points
- Tri-Band GPRS Communication Engine
- Always Connected Technology
- Global Operation - Unlimited Transmission Range
- RS232, Data Interface
- No external antenna required
- User-define addressable system
- Wide Voltage Operation 6-24Vdc
- Dual Power Supply input for Redundancy
- Ruggedised IP65+ enclosure
|
|
|
|
|
| iRTU 6000 Transmitter - 8-Channel Analog/Digital Input Transmitter (1Mb memory, LAN/WAN) |
|
- Eight universal input points
- High performance 10/100BaseT Ethernet Interface
- Connects easily to any WAN/LAN Network
- RS232, Data Interface
- User-define addressable system
- Wide Voltage Operation 6-24Vdc
- Dual Power Supply input for Redundancy
-
Ruggedised IP65+ enclosure
|
|
|
|
|
| iRTU 6000 Receiver - 8-Channel Analog/Digital Input Receiver (1Mb memory, LAN/WAN) |
|
- Eight universal output points
- High performance 10/100BaseT Ethernet Interface
- Connects easily to any WAN/LAN Network
- RS232, Data Interface
- User-define addressable system
- Wide Voltage Operation 6-24Vdc
- Dual Power Supply input for Redundancy
- Ruggedised IP65+ enclosure
|
|
|
|
|
| iTCU 10 Transmitter - 8-Channel Telecommand Transmitter (350m range) |
|
- 8 Channel remote control transmitter
- Easy to operate via a switch or PC
- Highly secure ESP protocol
- Range up to 350 meters
- Requires No Radio License to operate
- User-Friendly management software
- Addressable for multi-nodes application
- Wide Voltage Operation 6-24Vdc
- Dual Power Supply input for Redundancy
- M36 Easy-Install DIN Rail Enclosure
|
|
|
|
|
| iTCU 10 Receiver - 8-Channel Telecommand Receiver (350m range) |
|
- 8 Channel remote control receiver
- Relay base output
- Highly secure ESP protocol
- Range up to 350 meters
- Requires No Radio License to operate
- User-Friendly management software
- Addressable for multi-nodes application
- Wide Voltage Operation 6-24Vdc
- Dual Power Supply input for Redundancy
- M36 Easy-Install DIN Rail Enclosure
|
|
|
|
|
| iTCU 100 Transmitter - 8-Channel Telecommand Transmitter (5Km range) |
|
- 8 Channel remote control transmitter
- Easy to operate via a switch or PC
- Highly secure ESP protocol
- Range up to 5Km
- Requires No Radio License to operate
- User-Friendly management software
- Addressable for multi-nodes application
- Wide Voltage Operation 6-24Vdc
- Dual Power Supply input for Redundancy
- M36 Easy-Install DIN Rail Enclosure
|
|
|
|
|
| iTCU 100 Receiver - 8-Channel Telecommand Receiver (5Km range) |
|
- 8 Channel remote control receiver
- Relay base output
- Highly secure ESP protocol
- Range up to 5Km meters
- Requires No Radio License to operate
- User-Friendly management software
- Addressable for multi-nodes application
- Wide Voltage Operation 6-24Vdc
- Dual Power Supply input for Redundancy
- M36 Easy-Install DIN Rail Enclosure
|
|
|
|
|
| iTCU 1000 Transmitter - 8-Channel Telecommand Transmitter (global range via GSM) |
|
- 8 Channel remote control transmitter
- Easy to operate via a switch or PC
- Highly secure ESP protocol
- Global operation via the GSM Network
- User-Friendly management software
- Addressable for multi-nodes application
- Wide Voltage Operation 6-24Vdc
- Dual Power Supply input for Redundancy
- M36 Easy-Install DIN Rail Enclosure
|
|
|
|
|
| iTCU 1000 Receiver - 8-Channel Telecommand Receiver (global range via GSM) |
|
- 8 Channel remote control receiver
- Relay base output
- Highly secure ESP protocol
- Global operation via the GSM Network
- User-Friendly management software
- Addressable for multi-nodes application
- Wide Voltage Operation 6-24Vdc
- Dual Power Supply input for Redundancy
- M36 Easy-Install DIN Rail Enclosure
|
|
|
|
|
| iTCU 2000 Transmitter - 8-Channel Telecommand Transmitter (global range via GPRS) |
|
- 8 Channel remote control transmitter
- Easy to operate via a switch or PC
- Highly secure ESP protocol
- Global operation via the GPRS Network
- Always connected technology
- User-Friendly management software
- Addressable for multi-nodes application
- Wide Voltage Operation 6-24Vdc
- Dual Power Supply input for Redundancy
- M36 Easy-Install DIN Rail Enclosure
|
|
|
|
|
| iTCU 2000 Receiver - 8-Channel Telecommand Receiver (global range via GPRS) |
|
- 8 Channel remote control receiver
- Relay base output
- Highly secure ESP protocol
- Global operation via the GPRS Network
- Always connected technology
- User-Friendly management software
- Addressable for multi-nodes application
- Wide Voltage Operation 6-24Vdc
- Dual Power Supply input for Redundancy
- M36 Easy-Install DIN Rail Enclosure
|
|
|
|
|
| iTCU 5000 Transmitter - 8-Channel Telecommand Transmitter (global range via LAN/WAN) |
|
- Eight universal input points
- High performance 10/100BaseT Ethernet Interface
- Connects easily to any WAN/LAN Network
- RS232, Data Interface
- Highly secure ESP protocol
- Always connected technology
- User-define addressable system
- User-Friendly management software
- Addressable for multi-nodes application
- Wide Voltage Operation 6-24Vdc
- Dual Power Supply input for Redundancy
- M36 Easy-Install DIN Rail Enclosure
|
|
|
|
|
| iTCU 5000 Receiver - 8-Channel Telecommand Receiver (global range via LAN/WAN) |
|
- Eight universal output points
- High performance 10/100BaseT Ethernet Interface
- Connects easily to any WAN/LAN Network
- RS232, Data Interface
- Highly secure ESP protocol
- Always connected technology
- User-define addressable system
- User-Friendly management software
- Addressable for multi-nodes application
- Wide Voltage Operation 6-24Vdc
- Dual Power Supply input for Redundancy
- M36 Easy-Install DIN Rail Enclosure
|
|
|
|
|
Home >> M2M & Telemetry
|