Can we help? If you are currently working on an existing project or about to embark on new one. Speak to our team, we are always happy to advise you on various solutions that we may be able to provide. We have a wealth of knowledge and experience in the industry, so by contacting us we can immediately guide you in choosing the most appropriate system that best suits your needs.

Immediate Project Assistance Form

For more information on a2b Communication Building Management System Solution contact our Technical Sales Team. www.a2bcommunication.com/contact.htm

a2b Communication offers one of the most comprehensive solution for on-site Building Management System. Our product range combines the most recent advances in wireless, sensor and building technology to offer instant monitoring capability. Our short range a2b-LOG transmitters are designed to interface to various equipment found in a typical building, such as HVAC, Central Heating System, Water Distribution, Power Distribution, Building and Room Access to provide monitoring and management capability to the customer.

Eliminating the need for manual verification check and storage. Our wireless Building Management System use sophisticated software to manage historical data, analysis and risk assessments for verification, and printing reports for on demand inspection.

Alarm management functions allow immediate notification through several mobile phones or email addresses. There is also a pop-up alarm window with audible sound to notify personnel of alarms, location, time, date and type of equipment being monitored.

The local transmitter is designed to operate on a single C-Cell battery with operation period of typically 10+ years. Fully self-contained, enclosed using DIN or totally IP68 rated with integral antenna designed for easy installationl and interface to existing meters. Transmission Range is typically 250 meters line of sight with option of using Repeaters to increase coverage.

The BMS200 is designed specifically for accurate and centralised Building Management System for anyone who requires to monitor & manage various building resources such as Pump System, Hot & Cold Water System, Heating, Ventilation, AC and Access over wide area with multiple buildings.

The BMS200 is designed to operate using either internal or external sensors, multiple I/Os and data interface (RS232/RS422/RS485), making Multi-Site Building Management System simple and straightforward.

Equipment Status are read automatically at a pre-defined period such as real-time, every 30 minutes, every hour, every 6 hours, every 12 hours or once a day, therefore site visits are no longer necessary, except for routine maintenance.

Using a dedicated software such as "my a2b-LOG", building status are collected remotely, processed, presented in easy tabulated and graphical format for you to review, and then eventually archived. All you have to do is watch new building status reports from all the remote sites come in automatically, review operation trend by using our advanced "graph report generator" and if a site has problem such as equipment failure, you will be informed by an audible alarm from my a2b-LOG, receive a text message on your mobile phone and also an email alert.

Our Multi-Site Building Management System solution provides rapid building status report with instant information at your fingertips for analysis.

a2b Communication continues to lead in Web-based Building Management System, providing managed solution for monitoring building equipments and resources throughout the country.

The BMS300 is designed to operate using either internal or external sensors, multiple I/Os and data interface (RS232/RS422/RS485), making Multi-Site Building Management System simple and straightforward.

Equipment Status are read automatically at a pre-defined period such as real-time, every 30 minutes, every hour, every 6 hours, every 12 hours or once a day, therefore site visits are no longer necessary, except for routine maintenance.

The installation and operation is simple and does not require the end-user to have experience or special software for configuration. Once the BMS300 is activated, it will automatically communicate to my i-WEB Server to register automatically, once this is completed the user simply use any computer with internet access and login to view latest temperature reading.

Equipment and building status are collected automatically, processed, presented in easy tabulated and graphical format for you to review, and then eventually archived. All you have to do is watch new status report from all the remote sites come in automatically, enabling you to review trend by using our advanced "graph report generator" and if a site/point has problem such as equipment failure, you will be informed by an audible alarm from my i-WEB Temperature, receive a text message on your mobile phone and also an email alert.

Our Managed Building Management System solution provides rapid status report with instant access to information over the internet.

Automatic Building Management System Over Ethernet is simple and straightforward, allowing direct connection to your existing LAN/WAN, providing safe and cost-effective meter reading solutions for companies and organisations. The BMS400 is an IP (Internet Protocol) enabled Building Management Unit with integrated Ethernet Port , supporting TCP/IP, HTTP, POP3, FTP data communication over our secure ESP Protocol for safe data delivery. The Ethernet connectivity allows the BMS400 to stream status & readings to the eGateway running our dedicated Web Server program or directly to your own Website, or to our standalone software "my a2b-LOG".

The BMS400 can be assigned a static IP address or can receive one by a DHCP request. Ethernet connectivity eliminates the need for modem and phone line connections, enabling transfer of data over the internet without overheads of telephone maintenance costs or requirements for line sharing devices when a dedicated telephone line is difficult to obtain.

The BMS400 communicates over standard ports as shown on the list below.

HTTP (port 80)
SMTP (port 25)
POP3 (port 110)
FTP (port 21)

Building Equipments are read by the BMS400 then transmitted automatically, processed, presented in easy tabulated and graphical format for you to review, and then eventually archived. All you have to do is watch new readings from all the remote sites/points come in automatically, enabling you to review trend by using our advanced "graph report generator". If a site/point has problem such as equipment failure/alarm detected, you will be informed by an audible alarm from eGateway, receive a text message on your mobile phone and also an email alert.

Our Remote Building Management System Over Ethernet solution provides rapid Building Status report with instant access to information over the internet. Building Equipments are read automatically at a pre-defined period such as real-time, every 30 minutes, every hour, every 6 hours, every 12 hours or once a day, therefore site visits for are no longer necessary, except for routine maintenance.

a2b Communication also offers a wide range of solutions for Environmental Monitoring and Measurement. Our Environmental and Measurement systems combines Internet and Wireless technology together to provide instant solution for indoor and outdoor application without physical access or visual inspection of equipment in the fields. a2b Communication Environmental Management System is instrumental in helping companies tracks and monitor Air and Water quality, measure Liquid Level and Flow Rate, Noise Level monitoring, Gases Monitoring and supervision.

Can we help? If you are currently working on an existing project or about to embark on new one. Speak to our team, we are always happy to advise you on various solutions that we may be able to provide. We have a wealth of knowledge and experience in the industry, so by contacting us we can immediately guide you in choosing the most appropriate system that best suits your needs.

Immediate Project Assistance Form

For more information on a2b Communication Environmental Monitoring Solution contact our Technical Sales Team. www.a2bcommunication.com/contact.htm

a2b Communication offers one of the most comprehensive solution for Local Environmental Monitoring. Our product range combines the most recent advances in wireless, sensor and environmental technology to offer instant monitoring capability. Our short range EMS100 transmitters are designed to remotely measure environmental values, such as CO2, Air Quality, Water Quality, Liquid Level, Noise and Temperature & Humidity.

Eliminating the need for manual site visits for collecting recorded data, our wireless Environmental Monitoring System use sophisticated software to manage historical data, analysis and risk assessments for verification, and printing reports for on demand inspection.

Alarm management functions allow immediate notification through several mobile phones or email addresses. There is also a pop-up alarm window with audible sound to notify personnel of alarms, location, time, date and type of equipment being monitored.

The local transmitter is designed to operate on a single C-Cell battery with operation period of typically 10+ years. Fully self-contained, enclosed using DIN or totally IP68 rated with integral antenna designed for easy installation and interface to existing meters. Transmission Range is typically 250 meters line of sight with option of using Repeaters to increase coverage.

a2b Communication continues to lead in Web-based Environmental Monitoring, providing managed solution for monitoring environmental levels for wide range of applications and topology.

The EMS200 is designed specifically for accurate and centralised Environmental Monitoring for anyone who requires monitoring environmental level over wide area. The EMS200 is designed to operate using either internal or external sensors, making Multi-site Environmental Monitoring simple and straightforward.

Environmental levels are read automatically at a pre-defined period such as real-time, every 30 minutes, every hour, every 6 hours, every 12 hours or once a day, therefore site visits for Environmental Monitoring are no longer necessary, except for routine maintenance. The installation and operation is simple and does not require the end-user to have experience or special software for configuration. Once the EMS200 is activated, it will automatically communicate to my i-WEB Server to register automatically, once this is completed the user simply use any computer with internet access and login to view latest temperature reading.

Environmental readings are collected automatically, processed, presented in easy tabulated and graphical format for you to review, and then eventually archived. All you have to do is watch new temperature readings from all the remote sites/points come in automatically, enabling you to review temperature trend by using our advanced "graph report generator" and if a site/point has problem such as environmental level exceeding normal condition, you will be informed by an audible alarm from my i-WEB, receive a text message on your mobile phone and also an email alert.

Our Multi-site Environmental Monitoring solution provides rapid environmental readings for all applications, with instant access to information over the internet.

a2b Communication continues to lead in Web-based Temperature Monitoring, providing managed solution for monitoring temperature for wide range of applications and topology.

The EMS300 is designed specifically for accurate and centralised temperature reading and monitoring for anyone who requires to monitor environmental level over wide area. The EMS3000 is designed to operate using either internal or external environmental sensors, making environmental reading simple and straightforward.

Environmental Level are read automatically at a pre-defined period such as real-time, every 30 minutes, every hour, every 6 hours, every 12 hours or once a day, therefore site visits for environmental reading & recording are no longer necessary, except for routine maintenance.

The installation and operation is simple and does not require the end-user to have experience or special software for configuration. Once the EMS300 is activated, it will automatically communicate to my i-WEB Server to register automatically, once this is completed the user simply use any computer with internet access and login to view latest temperature reading.

Environmental level readings are collected automatically, processed, presented in easy tabulated and graphical format for you to review, and then eventually archived. All you have to do is watch new environmental readings from all the remote sites/points come in automatically, enabling you to review trend by using our advanced "graph report generator" and if a site/point has problem such as temperature value exceeding normal condition, you will be informed by an audible alarm from my i-WEB, receive a text message on your mobile phone and also an email alert.

Our Managed Temperature Environmental Monitoring provides rapid temperature readings for all applications, with instant access to information over the internet.

Automatic Environmental Monitoring over Ethernet is simple and straightforward, allowing direct connection to your existing LAN/WAN, providing safe and cost -effective Environmental Monitoring solutions for companies and organisations. The EMS400 is IP (Internet Protocol) enabled with integrated Ethernet Port , supporting TCP/IP, HTTP, POP3, FTP data communication over our secure ESP Protocol for safe data delivery. The Ethernet connectivity allows our devices to stream status & readings to the eGateway running our dedicated Web Server program or directly to your own Website, or to our standalone software "my a2b-LOG".

The EMS400 can be assigned a static IP address or can receive one by a DHCP request. Ethernet connectivity eliminates the need for modem and phone line connections, enabling transfer of data over the internet without overheads of telephone maintenance costs or requirements for line sharing devices when a dedicated telephone line is difficult to obtain.

EMS400 Ethernet Device communicates over standard ports as shown on the list below.

• HTTP (port 80)
• SMTP (port 25)
• POP3 (port 110)
• FTP (port 21)

Environmental reading are read by EMS400 Ethernet Device then transmitted automatically, processed, presented in easy tabulated and graphical format for you to review, and then eventually archived. All you have to do is watch new status & readings from all the remote sites/points come in automatically, enabling you to review trend by using our advanced "graph report generator". If a site/point has problem such as equipment failure/alarm level detected, you will be informed by an audible alarm from eGateway, receive a text message on your mobile phone and also an email alert.

Our Environmental Monitoring over Ethernet solution provides rapid status & environmental reading with instant access to information over the internet or dedicated PC.